[HPGMG Forum] HPGMG release v0.1

Mark Adams mfadams at lbl.gov
Mon Jun 9 16:41:23 UTC 2014


Jed did you add it to the repo?  I am ready to but can us yours if you are
updating it.  I'm sure this is OK with Bert and Ian,
Mark


On Mon, Jun 9, 2014 at 9:19 AM, Jed Brown <jed at jedbrown.org> wrote:

> "Vitali A. Morozov" <morozov at anl.gov> writes:
> > and see that you provide STREAM-based memory bandwidth for some
> > architectures. I suggest to specify a particular benchmark, let us say
> > "triad", because the result of STREAM is benchmark-dependent.
>
> Yes, I would prefer Triad.
>
> > For BG/Q, I have measured 29.3 GB/s/node on "triad". For Cray XC30, I
> > have measured 48.6 GB/s/socket or 97.1 GB/s/node. This is slightly
> > better than the numbers you have reported.
>
> I'll update the BG/Q number.  What code is needed to observe this?  (I
> think I've always heard 26-27 GB/s quoted and have not personally
> measured higher.)  It would be helpful to list this somewhere on the
> ALCF website.
>
>
> I assume that your 97 GB/s on XC30 using E5-2697v2?  The numbers I used
> come from this page which quotes STREAM Triad at 89 GB/s.
>
>   http://www.nersc.gov/users/computational-systems/edison/configuration/
>
> > For Cray XC30, the flop rate is 518.4 GF per node. For Xeon E5-2697 v2 @
> > 2.7 GHz,
>
> Edison uses E5-2695v2 (2.4 GHz), thus the somewhat lower number.
>
> > each core can have 8 Flops/cycle - 4 way FMA - or 8 * 2.7 = 21.6
> > GFlops per core. 12 cores result in 259.2 GFlops per socket, 2 sockets
> > give 518.4 GFlops.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://hpgmg.org/lists/archives/hpgmg-forum/attachments/20140609/90386dd6/attachment.html>


More information about the HPGMG-Forum mailing list